PolyЯRon SN 100
Super plasticizer for early high strength concrete
Description
PolyЯRon SN100 is a high range water reducing and super plasticizing admixture. It is most suitable for mixes of low water-cement ratio with
excellent workability to produce high strength concrete. Reduction in water-cement ratio will result in significant enhancement of compressive strength.
PolyЯRon SN100 is based on sulphonated naphthalene polymers blended with other selected ingredients to impart and enhance desired properties to concrete. It increases the
dispersion of cement particles and enables the water content in the concrete to perform to maximum efficiency.
Properties
- High range of water reduction in concrete mixes.
- Provides durable concrete due to reduction in permeability.
- Eliminates segregation and bleeding and improves pumpability and surface finish.
- Provides multi dosage system.
Application area
PolyЯRon SN100 is suitable for all kinds of high
early strength and high cement content concrete.
Typical application includes
- Early de-shuttering concrete
- Precast and site mixed concrete
- To produce high strength concrete
- To reduce permeability of concrete
Applicable standards
PolyЯRon SN100 complies with ASTM C-494 Type F.
Dosage
The normal dosage is 1.0 to 2.0 litres per 100kg cement which includes replacements (if any) such as microsilica, GGBFS, and fly ash. In case if the required dosage more
than2.0 litres per 100kg cement, consult HP Industries technical service department to customize the solution.
The optimum dosage should be determined by conducting laboratory/site trials considering proposed mix design, ambient conditions and performance
requirements. To improve the strength of concrete, admixture dosage should be optimised to achieve low water-cement ratio.
